Used Machinery

$3,750.00

SCM SI-16 W Sliding Table Saw

Specifications Panel saw with tilting blade and scoring unit Technical data: Carriage dimensions...

Specifications Panel saw with tilting blade and scoring unit Technical data: Carriage dimensions mm 1500 x 350 Fixed table dimensions mm 1150 x 630 Carriage stroke mm 2000 Blade inclination 0-45 degrees Blade diameter mm 350 F 30 Scoring unit  diameter mm 120 F 20 Cutting height at 90° mm 110 Cutting height at 45° mm 75 Blade motor Hp 5.5 Scoring unit  motor Hp 1 Overall dimensions: machine disassembled mm 2000 x 1200 x 1100 h Weight kg 620 Brand SCM Model SI-16 W Condition Good

$9,500.00

Brandt KDM 110 Edgebander

Brand Brandt Model KDM 110 Mfg Year 2013 Condition Good

Brand Brandt Model KDM 110 Mfg Year 2013 Condition Good

$1,500.00

$4,250.00

Becker Vacuum Pump

Brand Becker

Brand Becker

$5,000.00

Denray 72" X 48" Downdraft Table

Specifications 36 In. table height 5 HP motor 1 PH or 3 PH 220 Voltage, 1 PH or 230, 460, & ...

Specifications 36 In. table height 5 HP motor 1 PH or 3 PH 220 Voltage, 1 PH or 230, 460, & 575 Voltage, 3 PH 3900 CFM 78 Decibels Brand Denray Model 7200 Mfg Year 2010 Condition Good

$8,500.00

Denray 85" X 120" Dust Booth

Specifications Motor Horsepower (hp) 10 Overall Height (in) 96 Overall Length (in...

Specifications Motor Horsepower (hp) 10 Overall Height (in) 96 Overall Length (in) 120 Overall Width (in) 156 Vacuum Displacement (cfm) 10000 Voltage 230/460 Volts Weight (lbs) 3000 Brand Denray Model 85120 Mfg Year 2007 Condition Good Power 230/460v, 60cy, 3ph

$850.00

Powermatic 1150 Drill Press

Brand Powermatic Model 1150 Power 110 Volt

Brand Powermatic Model 1150 Power 110 Volt

$750.00

Genie GL-8 Material Lift

Brand Genie Model GL-8 Condition Good

Brand Genie Model GL-8 Condition Good

$150.00

DeWalt Radial Arm Saw

Brand Dewalt

Brand Dewalt

$2,500.00

Kreg DK3100 Pocket Hole Machine

Specifications Motor 11/2"-HP Drill Bits DKDB Drill Bit 3/8" shank diameter 3/16" pilot 1/...

Specifications Motor 11/2"-HP Drill Bits DKDB Drill Bit 3/8" shank diameter 3/16" pilot 1/2"-long CFM Rating 1 CFM clamp cylinder (90 PSI/minute) Cycle Time 1 second Material Clamping Capacity 4" Hole-Centering Capability 1/2"- to 11/2"-thick material Weight 176 lbs. Dimensions 50"H x 24"W x 24"D (40" table height) On-Center Spindle Spacings 3/4", 1", 13/4" Brand Kreg Model DK3100 Mfg Year 2013 Condition Good Power 115 Volt / 1 Phase

$23,950.00

DMC Unisand 2000 53" Orbital Sander

Specifications DMC Unisand 2000 53" Orbital Sander with (2) Pads and (1) Brush Equipped with (2)...

Specifications DMC Unisand 2000 53" Orbital Sander with (2) Pads and (1) Brush Equipped with (2) 10" Wide platens for the elimination of cross-grain scratches; each dual orbital action head equipped with 5.5 HP motor for orbital motion and 1.5 HP motors for side to side movement; each head rotates at 3500 RPM 53" (1350mm) Maximum panel width 2" (52mm) Minimum panel width 16" (400mm) Minimum panel length 6-5/8" (170mm) Maximum panel height 3/16" (4mm) Minimum panel height Abrasive size: 18" x...

$59,000.00

Costa KA CCCT 1350 53" 4-Head Sander

Manufactured in 2004, in very good condition, in a shop with a rigorous PM program 53” wide belt...

Manufactured in 2004, in very good condition, in a shop with a rigorous PM program 53” wide belt 4 head; first head contact drum, 2nd head counter-rotating contact drum, 3rd head contact drum, 4th head, platen, followed by cleaning brush, with constant pass height. In very good condition, in a shop with a rigorous PM program.  This was used with a following DMC Unisand 2000 orbital sander, also with constant pass height 480 V, installed power 88 KW Brand Costa Model KA CCCT 1350 Mfg Ye...