Boring Machines

$850.00

Powermatic 1150 Drill Press

Brand Powermatic Model 1150 Power 110 Volt

Brand Powermatic Model 1150 Power 110 Volt

$2,500.00

Kreg DK3100 Pocket Hole Machine

Specifications Motor 11/2"-HP Drill Bits DKDB Drill Bit 3/8" shank diameter 3/16" pilot 1/...

Specifications Motor 11/2"-HP Drill Bits DKDB Drill Bit 3/8" shank diameter 3/16" pilot 1/2"-long CFM Rating 1 CFM clamp cylinder (90 PSI/minute) Cycle Time 1 second Material Clamping Capacity 4" Hole-Centering Capability 1/2"- to 11/2"-thick material Weight 176 lbs. Dimensions 50"H x 24"W x 24"D (40" table height) On-Center Spindle Spacings 3/4", 1", 13/4" Brand Kreg Model DK3100 Mfg Year 2013 Condition Good Power 115 Volt / 1 Phase

$10,950.00

Gannomat Index Trend 130 Dowel Bore Insert

Specifications NC Controlled X axis 1300mm Travel Speed 105 m/min. Manual Digital Setting of Z a...

Specifications NC Controlled X axis 1300mm Travel Speed 105 m/min. Manual Digital Setting of Z axis position Manual Digital Setting of Y axis boring depth 5-40mm 50mm maximum Dowel Projection Range 7-20mm Clamping Height of Workpiece 80mm maximum Working Height of Machine 900mm Horizontal Boring Unit Motor Power 0.65 kW @ 8,000 RPM Spindle Speed 8000 RPM Possible Dowel Dimension 6, 8, 10mm, 25-50mm length Air Pressure Required 6-8 bar Electrical 400/3/50 with 230/575 volt transformer Air Con...

$2,500.00

Ritter R202T 5-Degree Pocket Borer

Brand Ritter Model R202T Mfg Year 2004 Condition Good Power 220 Volt / 1 Phase

Brand Ritter Model R202T Mfg Year 2004 Condition Good Power 220 Volt / 1 Phase

$2,500.00

Omal Insert C Insertion Machine

Specifications 1.5 HP motor 5-spindle gearbox Center fence Table (700 mm x 400 mm) Right hand an...

Specifications 1.5 HP motor 5-spindle gearbox Center fence Table (700 mm x 400 mm) Right hand and left hand extension rulers (700 mm /2'4'' each) 4 tilt stops (to index panels on the fence) Pneumatic (85 psi) hold down clamps Shank diameter: ø 10 mm Brand Omal Model Insert C Mfg Year 2001 Condition Good Power 220 Volt / 1 Phase

$3,500.00

Ritter R-46 Double Row Boring Machine

Specifications (2) 23-Spindle units drills from the top Distance between rows 4" - 22", both hea...

Specifications (2) 23-Spindle units drills from the top Distance between rows 4" - 22", both heads adjustable on rack & pinion w/digital readouts 30" x 48" table cycles up/down - 3" max. stroke (2) 3 HP - 1,725 RPM motors, spindles gear driven 48" Back fence with (2) stops, (2) pneumatic hold-downs per head, magnetic motor controls Foot pedal operated Air requires 90 PSI Drill requirements: (24) RH and (22) LH drill bits with 10 mm shaft & 55 mm OPL Brand Ritter Model R-46 Mfg ...

$7,995.00

Gannomat 410 Elite 25 Bore Glue Dowel Machine

Specifications Single 32mm Line-Boring Head w/ 25 Spindles Eight Dowel Insertion Units Four Pn...

Specifications Single 32mm Line-Boring Head w/ 25 Spindles Eight Dowel Insertion Units Four Pneumatic Hold-Downs Table Size: 38 x 14 in. 2.2kw, 230v, 3ph Boring Depth Capacity: 45mm (1.7in.) Boring Position Height: 5-40mm (0.19-1.5 in.) Dowel Length outside of Panel 5-15mm or 15-25mm Maximum Workpiece Thickness: 70mm (2.7in) Min. Workpiece Width: 830mm (32.6 in.) Vibrating Dowel Hopper, Mechanical Digital Readouts for Set-up Foot Pedal and Push-Button Controls Brand Gannomat M...

$750.00

Norfield 250M Strike Jamb Router

Specifications Strike router capacity of 9' length x 1-5/8" thickness cap. & infinite width ...

Specifications Strike router capacity of 9' length x 1-5/8" thickness cap. & infinite width For mortising plate & bolt relief in (1) continuous operation Processes any strike up to 4-7/8" long, including T-strike. Rectangular relief leaves more wood in jamb for greater strength and more professional appearance. (without dead-bolt system) Estimated Dimensions: 96" L x 24" W x 50" H Estimated Weight: 500 Pounds Brand Norfield Model 250M Condition Good

$750.00

Norfield 250M Strike Jamb Router

Specifications Strike router capacity of 9' length x 1-5/8" thickness cap. & infinite width ...

Specifications Strike router capacity of 9' length x 1-5/8" thickness cap. & infinite width For mortising plate & bolt relief in (1) continuous operation Processes any strike up to 4-7/8" long, including T-strike. Rectangular relief leaves more wood in jamb for greater strength and more professional appearance. (without dead-bolt system) Estimated Dimensions: 96" L x 24" W x 50" H Estimated Weight: 500 Pounds Brand Norfield Model 250M Condition Good

$4,500.00

Omal RF F1 Rafix Inserter

Overview The OMAL Insert RF F1 Hardware Insertion Machine is designed to drill and insert RAFIX o...

Overview The OMAL Insert RF F1 Hardware Insertion Machine is designed to drill and insert RAFIX or similar hardware. The machine is offered with an interchangeable hopper system for different colored inserts. The machine is standard with single unit and comes optional with TWO insertion units - one fixed and one moveable. The right side drilling/insertion unit is moveable by hand and easily locked in position plus this can be motorized with numerical control and bar code as an option. The wor...

$3,500.00

Ritter R-46 Dual Row Line Borer

Specifications (2) 23-Spindle units drills from the top Distance between rows 4" - 22", both hea...

Specifications (2) 23-Spindle units drills from the top Distance between rows 4" - 22", both heads adjustable on rack & pinion 30" x 48" table cycles up/down - 3" max. stroke (2) 3 HP - 1,725 RPM motors, spindles gear driven 48" Back fence with (2) stops, (2) pneumatic hold-downs per head, magnetic motor controls Foot pedal operated Air requires 90 PSI Drill requirements: (24) RH and (22) LH drill bits with 10 mm shaft & 55 mm OPL 56” long x 52” wide x 75” high weighs 750 lbs. Bran...

$4,550.00

Mesa M42 (BM 0009) Double Line Borer

Specifications (2) each 21-Spindle boring heads on 32 mm centers, drills vertically from bottom ...

Specifications (2) each 21-Spindle boring heads on 32 mm centers, drills vertically from bottom up. 3 Kw- 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout. 5-1/4" (135 mm) Min. and 32" (815 mm) Max. distance between boring units. 3" (85/78 mm) Max. drilling depth. Equipped with: Left side fence with stops, (2) pneumatic hold-down clamps, pneumatic foot pedal control, and magnetic starter with overload protection Brand ...